The maximum play area with the SteamVR base stations 2.0 is 10 x 10 meters. It is recommended to use 2 sensors then. This makes the tracking very accurate and the sensors ‘see’ the entire space.
The maximum play space with the SteamVR base stations 2.0 is 10 x 10 meters. It is recommended to use 4 sensors. This makes the tracking very accurate and the sensors 'see' the entire room.
The sensors can be placed in several ways, for example with a wall mount, a tripod or with a clamp. Place the sensors in the corners of the room, preferably at a height of 2 meters. This way you get the maximum fun out of the base stations.
The sensor comes with a 3.5 meter power cable. The brackets are not included.
Note: Do not move the sensors once you have turned them on, as this can cause them to break.
Why does the light keep flashing on the base unit?
A blue light means that the base station is not stable. Be careful with vibrations and oscillations. A red light means there is an error. No light means that the base station is not receiving power.
How does energy management work?
When this feature is OFF, your base stations remain on and transmit when connected. When this feature is ON, your base stations go into standby mode when SteamVR is not in use. They will “wake up” again when SteamVR starts.
How many base stations do I need?
For most play spaces, we recommend two base stations. If the space is larger than 5 by 5 feet, you can add additional base stations for better tracking and greater accuracy.
How do I resolve a failure between base stations?
If there is interference with the base stations then it is important that the channels are changed or aligned with the other base stations. Devices > Base station settings > Configure base station channels
Tracking is a problem. How do I fix it?
The problem can be fixed by redoing the room setup. In doing so, try to remove as much reflective material from the room as possible.
How do I prevent the base stations from turning on and off?
Restart SteamVR. If this does not solve the problem, restart the computer.
You are now on the VR Expert Consumer site in the International region