ClickCease

How to connect the Vuzix Blade Upgraded to your computer?

Last modified: April 16, 2021
In this article you will learn how to connect the Vuzix Blade Upgraded to your computer

What is needed:

  • Vuzix Blade Upgraded
  • PC
  • Micro USB cable

How to connect your Vuzix Blade Upgraded to your computer.

  1. Turn on your PC.
  2. Plug the USB cable into the PC.
  3. Plug the other end of the cable into your Vuzix Blade Upgraded.
  4. On your PC click on the Windows logo on the bottom left of your screen.
  5. Type ‘file explorer’ and press enter. This will open the File explorer menu.
  6. In the File explorer menu go to ‘This PC.’
  7. Your Vuzix Blade Upgraded should show up here.

7.1 If the Vuzix Blade Upgraded did not show up here follow the following steps.

7.2 Unplug the Vuzix Blade Upgraded from the USB cable.

7.3 Turn on the Vuzix Blade Upgraded and put it on.

7.4 Go to settings on your Vuzix Blade Upgraded, if you do not know how to open settings read our article about it.

7.5 In settings go to Device > USB Mode.

7.6 Change the USB Mode settings to MTP (Media Transfer Protocol). This will bring you back to the Device Menu screen.

7.7 Take off your Vuzix Blade Upgraded and plug the USB cable back in.

7.8 Your Vuzix Blade Upgraded should now show up in the File explorer menu.

  Your Vuzix Blade Upgraded should now be connected to your computer.
Was this article helpful?
No 0 of 0 found this article helpful.
Close Menu
×
×

Basket